sifneos4fx
03 Apr 2022, 09:18 ( Updated at: 21 Dec 2023, 09:22 )

RE: RE: RE: RE: RE: Can we buy the whole suit now

Hi there, 

Please send an email to: support@elliottwaverobot.com, I may send you the bot to your mailbox.

Best regrds, 

driftingprogrammer said:

Hi,

 

I am not able to download trendpilot anymore, the website does not seem to be working. Please let us know if the cBot is still available, and if it is possible to download the latest version.

 

Thanks,

Vipin.

 

sifneosfx said:

WOW, this is exceptional good results. For sure, the super high volatility of the last week helped a lot. 

Thanks for sharing!

 

driftingprogrammer said:

sifneosfx said:

Hi Ben, 

it makes no sense to run the same asset in two different timeframes, as on one the system may find a sell signal and on the other a buy signal. This will confuse your trading for sure. I strongly recommend to use just one instance of the asset and decide wherever to run it on 4h or 1h. We will not build in such a function to distinct between timeframes as we see it as non productive. 

We will not introduce any new parameters as parameters we have delivered are samples. Because every broker delivers different historically data, the results always vary. It is your duty to find best parameters for any given asset, timeframe, broker.

Customer are informed by mail on new versions. All updates are for customers free, lifetime.

Hope that helps...

driftingprogrammer said:

Hi,

I have been testing your robot on all 30 parameters.

There are 2 markets  which are running on both 1 hr and 4 hr timeframe. By looking at the log output is it possible to make a distinction between the outputs of these 2 robots.

I have found in the last one month the robot has performed extremely poorly on NZDUSD using the default parameters that come with the download. I am unable to assess weather both the instances of NZDUSD are performing poorly or only one of them is performing poorly.

If it is not possible to make that distinction it would be great if such a feature is added sometime in the future,

Is it ok to go ahead and buy the Robot now. After buying the robot when you intriduce new parameters for new markets or update existing parameters for better performance how do you inform the existing customers.

Please let me know.

Thanks in advance.

Cheers.

 

 

Here are the test results of running all the 30 parameters for the last 48 hours, one would think that during these times the robot might fail but he performed much better, while i was not expecting more then 20% monthly return it gave a 40% return in 2 days ->

 

 

 

sifneos4fx
30 Jun 2021, 10:43

RE:

Thank you for your Answer. Indeed, both the JSON and the Object were not in a valid format. This is how I implement the classes:

        public partial class License
        {
            [JsonProperty("success")]
            public bool Success { get; set; }
    
            [JsonProperty("data")]
            public Data Data { get; set; }
        }
    
        public partial class Data
        {
            [JsonProperty("id")]
            public long Id { get; set; }
    
            [JsonProperty("orderId")]
            public long OrderId { get; set; }
    
            [JsonProperty("productId")]
            public long ProductId { get; set; }
    
            [JsonProperty("userId")]
            public long UserId { get; set; }
    
            [JsonProperty("licenseKey")]
            public string LicenseKey { get; set; }
    
            [JsonProperty("expiresAt")]
            public DateTimeOffset ExpiresAt { get; set; }
    
            [JsonProperty("validFor")]
            public object ValidFor { get; set; }
    
            [JsonProperty("source")]
            public long Source { get; set; }
    
            [JsonProperty("status")]
            public long Status { get; set; }
    
            [JsonProperty("timesActivated")]
            public object TimesActivated { get; set; }
    
            [JsonProperty("timesActivatedMax")]
            public long TimesActivatedMax { get; set; }
    
            [JsonProperty("createdAt")]
            public DateTimeOffset CreatedAt { get; set; }
    
            [JsonProperty("createdBy")]
            public long CreatedBy { get; set; }
    
            [JsonProperty("updatedAt")]
            public DateTimeOffset UpdatedAt { get; set; }
    
            [JsonProperty("updatedBy")]
            public long UpdatedBy { get; set; }
        }      

Thank you once again!

amusleh said:

Hi,

Your question is not related to cTrader Automate API, you have to Google these types of questions or post your question on Stackoverflow.

Your object and Json have invalid format, try this:

using cAlgo.API;
using Newtonsoft.Json;
using System;

namespace cAlgo
{
    [Indicator(IsOverlay = false, TimeZone = TimeZones.UTC, AccessRights = AccessRights.FullAccess)]
    public class JsonDeserializeTest : Indicator
    {
        private string _json = @"{
success: true,
data:
{
id: 14,
orderId: 21,
productId: 20,
userId: 1,
licenseKey: 'RS-KH-0G-6B-FD-A7-CS-W7',
expiresAt: '2021-07-26 00:00:00'
}
}";

        protected override void Initialize()
        {
            var licence = JsonConvert.DeserializeObject<Licence>(_json);

            Print(licence.Data.ExpiresAt);
        }

        public override void Calculate(int index)
        {
        }
    }

    public class Licence
    {
        public string Success { get; set; }
        public Data Data { get; set; }
    }

    public class Data
    {
        public int Id { get; set; }
        public int OrderId { get; set; }
        public int ProductId { get; set; }
        public int UserId { get; set; }
        public string LicenseKey { get; set; }
        public DateTime ExpiresAt { get; set; }
    }
}

It works fine on my system, I removed some of your data object properties for brevity.

sifneos4fx
28 Jun 2021, 09:59 ( Updated at: 28 Jun 2021, 10:14 )

This is what I want to use:

Licence licence = JsonConvert.DeserializeObject<Licence>(json_str);

To do so, I'am referencing to the Newtonsoft.Json.dll -> https://www.nuget.org/packages/Newtonsoft.Json/

The namespace using Newtonsoft.Json; is now recognized, however, when building the project, i get the error "unable to load assembly", however, the bot works, but the "licence" object remains null. 

sifneos4fx
27 Jan 2021, 09:13

Thanks!

Best regards, 

sifneos4fx
21 Dec 2019, 11:35 ( Updated at: 21 Dec 2023, 09:21 )

RE:

Hello Panagiotis

you can reproduce the issue if you draw trendline in high timeframes 1m, 1w, 3d, 2d, 1d, and switch then to lower time frame. i.e.

Draw this line in 1m time frame. 

Now, switching down to 1w, breaks the start and end point:

Drawing the line on 1w timeframe and switching down to 3d, trend line slips too. 

PanagiotisCharalampous said:

Hi Patrick,

There is a known issue in cTrader with trend lines. Can you tell me in which timeframe you are drawing the lines and start and end point coordinates so that I can reproduce the issue and let you know what happens?

Best Regards,

Panagiotis 

Join us on Telegram

 

sifneos4fx
16 May 2019, 12:43

RE:

oops, sorry about that, somehow I missed this "Use Chart.DrawStaticText"!

Thank you

PAtrick

Panagiotis Charalampous said:

Hi Patrick,

I am not sure what suggestions do you need. The warnings are clear. You shoud use  Chart.DrawStaticText() instead.

Best Regards,

Panagiotis

sifneos4fx
07 May 2019, 17:59

RE:

The hint to track responses is the key in my solution!

Thank you!

Patrick

Panagiotis Charalampous said:

Hi Patrick,

There is no single line solution for this. In general, you should keep track of the orders sent and the responses received. If e.g. you have a max number of 50, 48 positions open and 2 orders in progress, for which a response has not beed received, them probably you will have 50 positions soon. In this case, you should not open any further positions. You could have a global counter for the orders in progress (static variable?) which will be increased just before sending the order and decreased after a TradeResult is received.

Let me know if the above helps

Best Regards,

Panagiotis

sifneos4fx
07 May 2019, 15:45

RE:

This is exactly what happens some times in high volatitliy situations, it is selten but I want to fix it. So, any suggestions where to start?

Thank you

Patrick

Panagiotis Charalampous said:

Hi Patrick,

Positions property is updated after the order is successfully executed and the relevant message sent back to the application. If you execute trading in between, there is a change to send orders before Positions is updated. Therefore, if you need to be strict with the number of positions, you would need to implement more complicated checks to avoid this situation.

Best Regards,

Panagiotis

sifneos4fx
17 Mar 2019, 11:21

RE:

Sorry, my bad. Because the issue with thte bloured fibonacci lines has been fixed, I htought it was the shourtcut issue too. 

I must say, cTRader it is very stable, I had not a single crash last 18 months!!!!

Best,

Patrick

Panagiotis Charalampous said:

Hi Patrick,

We never actually reported that this was fixed. We are still working on this. In the meanwhile, please avoid using dotted lines.

Best Regards,

Panagiotis

sifneos4fx
12 Mar 2019, 15:37

RE:

Any news here?

sifneos4fx said:

Hello Panagiotis

With the lates release came back the previous bug (see here: https://ctrader.com/forum/ctrader-support/15771). The lines are no more bloured, however, arrow shortcuts to change timeframe doesn't worj for 15m, 5m and 1m chart.

Best Regards, 

Patrick

 

 

sifneos4fx
08 Mar 2019, 11:29

In Spotware Public Beta I don't see any targets at all. In FXPro cTRader 3.3 I see all targets but the weekly. The weekly target is the same as the 1D Target.

sifneos4fx
06 Mar 2019, 11:31

Hello Panagioti

With the newest cTrader update, the "Fibonacci" issue is been fixed. Fibo lines are now all same thick/slim, no blouriness any more and dotted lines does not effect any more the timeframe shortcuts.

Well done!

Thank you!

Patrick

sifneos4fx
27 Feb 2019, 11:25

RE:

Hello Panagiotis

Indeed, changing from dots to lines solves the problem. I believe, that was a tough nut to crack. Thanks!

Best, 

Patrick

Panagiotis Charalampous said:

Hi Patrick, 

As you have been informed by email, we have reproduced the issue and will be fixed in an upcoming update. In the meanwhile you can avoid using dashed lines on fiboniacci retracement tool which seems to cause the issue.

Best Regards,

Panagiotis

sifneos4fx
26 Feb 2019, 10:23 ( Updated at: 21 Dec 2023, 09:21 )

RE:

Hello Panagiotis

There are several Directories and Files, see attachmant. Which one?

Panagiotis Charalampous said:

Hi Patrick,

Can you please send us your settings file at community@spotware.com? You can find it at C:\Users\UsernameAppData\Roaming\Broker cTrader.

Best Regards,

Panagiotis

sifneos4fx
25 Feb 2019, 10:09

RE:

Surre, couldn't load it here, find recording here: http://sifneos.com/cTRader-timeframe-shortcuts.mp4

As I hit arrow key, you may see how the quicklink is been properly highlighted, however, the timeframe changes by the time the mouse pointer crosses the quicklink bar, no click is needed, just mouse over...

Panagiotis Charalampous said:

Hi Patrick,

I triend this but I cannot reproduce it. Charts change with up and down arrows. Is there a chance that your cTrader lost focus and does not respond to the buttons any more? Can you record a short video demonstrating the behavior with the mouse?

Best Regards,

Panagiotis

sifneos4fx
23 Feb 2019, 10:14

I found out, when I restart cTRader, dettached watchlists are shown after I right-click somewhere within an attached or detached chart-area.

sifneos4fx
21 Feb 2019, 08:04

RE:

Googd morning Panagiotis

I got 3x24" Lenovo Thinkvision 2560x1440.

When scaling is 100% no bluriness on side menus, however Fibonacci lines still blured. When using scaling bigger than 100% side menus are blured.

However, I dont care about the menus, sharp lines (or dots) for Fibonnaci it is much more important. 

Thank you

Patrick

Panagiotis Charalampous said:

Hi Patrick,

We will need some more information regarding this. Can you please let us know the following?

1. How many monitors do you use?
2. What is the resolution of each one?
3. Do you use any scaling and what scaling?

Best Regards,

Panagiotis 

sifneos4fx
20 Feb 2019, 10:39

RE:

Can't reproduce now as well, seems to be a network/broker issue, I wil do a video if I can reproduce it again...

Panagiotis Charalampous said:

Hi Patrick,

I cannot reproduce such behavior. Any chance you can record a short video demonstrating this behavior?

Best Regards,

Panagiotis

sifneos4fx
19 Feb 2019, 12:20

RE:

Hello Panagiotis

I did new about linked charts. However, I believe good software gives to all users the same possibilities, one works this way another works the other way. I agree that linked charts are for some traders very important, to me are useless, but I got no possiblity to return to previous small tabs. There must be a possiblity to turn linked chart off and have small tiny tabs.

Than you

Patrick

Panagiotis Charalampous said:

Hi Patrick,

Thanks for your feedback. FYI linked charts has been one of the most voted features. Shortcuts will come in future versions but I cannot commit when. Nevertheless, they are in our backlog.

Best Regards,

Panagiotis

sifneos4fx
18 Feb 2019, 11:38

RE:

Great!

Panagiotis Charalampous said:

Hi all,

We will add this option in one of the future updates.

Best Regards,

Panagiotis