Description
TopGrid is a simple universal robot.
EURUSD, Forex and Commodity.
Trend + PipStep + Martingale
Grid Trading with Martingale.
EURUSD M1 - Try this config:
Buy: yes
Sell: yes
Pip Step: 100
First volume: 1000
Volume exponent: 1.2 (based on your budget, try smaller multiplier, or negative f.x 0.9)
Max spread: 10
Average TP: 20
Starting capital: 1000 Euro
Pay attention to the configurations if you change financial instrument, remember to test in demo account.
Each tool requires attention and study of the graph and behavior to find the correct parameters.
Risk is part of your strategy.
(Derived from the original code Smart Grid)
Have fun.
Contact:
Telegram @mattiamusiello
- Alternatives and variants
Smart Grid V3 (fork derived from the original code Smart Grid)
A slightly modified version with the addition of some parameters, an interesting evolution to test.
In my opinion the SL is an obstacle in this strategy since it uses an average calculated for the TP and fixing how many positions to open can be a double-edged sword, but useful for Bots with progressive startup controlled according to your budget.
For my 2 cent.
Power Ranger Robot
Another alternative that uses the Grid, a very fun tool on which to play with the parameters with satisfactory results.
Good fun.
Each financial instrument is to be used with caution, remember to use the Demo accounts, for any operational doubts regarding expenses and limits communicated with your Broker.
These are my advice on machines for work, any economic loss is personal.
All robots must be constantly monitored, markets change often and without warning.
Each job requires time, dedication and many trials and many failures.
Good luck.
Mattia.
//+------------------------------------------------------------------+
//| Top Grid |
//| |
//| http://mattiahub.blogspot.com |
//+------------------------------------------------------------------+
//Universal cBot - Configured for commodity and forex
//Configure correctly parameters for specific job
using System;
using System.Linq;
using cAlgo.API;
namespace cAlgo
{
[Robot(TimeZone = TimeZones.UTC, AccessRights = AccessRights.None)]
public class TopGrid : Robot
{
[Parameter("Buy", DefaultValue = true)]
public bool Buy { get; set; }
[Parameter("Sell", DefaultValue = true)]
public bool Sell { get; set; }
[Parameter("Pip Step", DefaultValue = 10, MinValue = 1)]
public int PipStep { get; set; }
[Parameter("First Volume", DefaultValue = 1000, MinValue = 10, Step = 10)]
public int FirstVolume { get; set; }
[Parameter("Volume Exponent", DefaultValue = 1.0, MinValue = 0.01, MaxValue = 5.0)]
public double VolumeExponent { get; set; }
[Parameter("Max Spread", DefaultValue = 3.0)]
public double MaxSpread { get; set; }
[Parameter("Average TP", DefaultValue = 3, MinValue = 1)]
public int AverageTP { get; set; }
private string Label = "MTT";
private Position position;
private DateTime tc_31;
private DateTime tc_32;
private int gi_21;
private double sp_d;
private bool is_12 = true;
private bool cStop = false;
protected override void OnStart()
{
}
protected override void OnTick()
{
sp_d = (Symbol.Ask - Symbol.Bid) / Symbol.PipSize;
if (o_tm(TradeType.Buy) > 0)
f0_86(pnt_12(TradeType.Buy), AverageTP);
if (o_tm(TradeType.Sell) > 0)
f0_88(pnt_12(TradeType.Sell), AverageTP);
if (MaxSpread >= sp_d && !cStop)
Open_24();
RCN();
}
protected override void OnError(Error error)
{
if (error.Code == ErrorCode.NoMoney)
{
cStop = true;
Print("openning stopped because: not enough money");
}
}
protected override void OnBar()
{
RefreshData();
}
protected override void OnStop()
{
ChartObjects.RemoveAllObjects();
}
private void Open_24()
{
if (is_12)
{
if (Buy && o_tm(TradeType.Buy) == 0 && MarketSeries.Close.Last(1) > MarketSeries.Close.Last(2))
{
gi_21 = OrderSend(TradeType.Buy, fer(FirstVolume, 0));
if (gi_21 > 0)
tc_31 = MarketSeries.OpenTime.Last(0);
else
Print("First BUY openning error at: ", Symbol.Ask, "Error Type: ", LastResult.Error);
}
if (Sell && o_tm(TradeType.Sell) == 0 && MarketSeries.Close.Last(2) > MarketSeries.Close.Last(1))
{
gi_21 = OrderSend(TradeType.Sell, fer(FirstVolume, 0));
if (gi_21 > 0)
tc_32 = MarketSeries.OpenTime.Last(0);
else
Print("First SELL openning error at: ", Symbol.Bid, "Error Type: ", LastResult.Error);
}
}
N_28();
}
private void N_28()
{
if (o_tm(TradeType.Buy) > 0)
{
if (Math.Round(Symbol.Ask, Symbol.Digits) < Math.Round(D_TD(TradeType.Buy) - PipStep * Symbol.PipSize, Symbol.Digits) && tc_31 != MarketSeries.OpenTime.Last(0))
{
long gl_57 = n_lt(TradeType.Buy);
gi_21 = OrderSend(TradeType.Buy, fer(gl_57, 2));
if (gi_21 > 0)
tc_31 = MarketSeries.OpenTime.Last(0);
else
Print("Next BUY openning error at: ", Symbol.Ask, "Error Type: ", LastResult.Error);
}
}
if (o_tm(TradeType.Sell) > 0)
{
if (Math.Round(Symbol.Bid, Symbol.Digits) > Math.Round(U_TD(TradeType.Sell) + PipStep * Symbol.PipSize, Symbol.Digits))
{
long gl_59 = n_lt(TradeType.Sell);
gi_21 = OrderSend(TradeType.Sell, fer(gl_59, 2));
if (gi_21 > 0)
tc_32 = MarketSeries.OpenTime.Last(0);
else
Print("Next SELL openning error at: ", Symbol.Bid, "Error Type: ", LastResult.Error);
}
}
}
private int OrderSend(TradeType TrdTp, long iVol)
{
int cd_8 = 0;
if (iVol > 0)
{
TradeResult result = ExecuteMarketOrder(TrdTp, Symbol, iVol, Label, 0, 0, 0, "top_grid");
if (result.IsSuccessful)
{
Print(TrdTp, "Opened at: ", result.Position.EntryPrice);
cd_8 = 1;
}
else
Print(TrdTp, "Openning Error: ", result.Error);
}
else
Print("Volume calculation error: Calculated Volume is: ", iVol);
return cd_8;
}
private void f0_86(double ai_4, int ad_8)
{
foreach (var position in Positions)
{
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TradeType.Buy)
{
double? li_16 = Math.Round(ai_4 + ad_8 * Symbol.PipSize, Symbol.Digits);
if (position.TakeProfit != li_16)
ModifyPosition(position, position.StopLoss, li_16);
}
}
}
}
private void f0_88(double ai_4, int ad_8)
{
foreach (var position in Positions)
{
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TradeType.Sell)
{
double? li_16 = Math.Round(ai_4 - ad_8 * Symbol.PipSize, Symbol.Digits);
if (position.TakeProfit != li_16)
ModifyPosition(position, position.StopLoss, li_16);
}
}
}
}
private void RCN()
{
if (o_tm(TradeType.Buy) > 1)
{
double y = pnt_12(TradeType.Buy);
ChartObjects.DrawHorizontalLine("bpoint", y, Colors.Yellow, 2, LineStyle.Dots);
}
else
ChartObjects.RemoveObject("bpoint");
if (o_tm(TradeType.Sell) > 1)
{
double z = pnt_12(TradeType.Sell);
ChartObjects.DrawHorizontalLine("spoint", z, Colors.HotPink, 2, LineStyle.Dots);
}
else
ChartObjects.RemoveObject("spoint");
ChartObjects.DrawText("pan", A_cmt_calc(), StaticPosition.TopLeft, Colors.Tomato);
}
private string A_cmt_calc()
{
string gc_78 = "";
string wn_7 = "";
string wn_8 = "";
string sp_4 = "";
string ppb = "";
string lpb = "";
string nb_6 = "";
double dn_7 = 0;
double dn_9 = 0;
sp_4 = "\nSpread = " + Math.Round(sp_d, 1);
nb_6 = " Top Grid";
if (dn_7 > 0)
wn_7 = "\nBuy Positions = " + o_tm(TradeType.Buy);
if (dn_9 > 0)
wn_8 = "\nSell Positions = " + o_tm(TradeType.Sell);
if (o_tm(TradeType.Buy) > 0)
{
double igl = Math.Round((pnt_12(TradeType.Buy) - Symbol.Bid) / Symbol.PipSize, 1);
ppb = "\nBuy Target Away = " + igl;
}
if (o_tm(TradeType.Sell) > 0)
{
double osl = Math.Round((Symbol.Ask - pnt_12(TradeType.Sell)) / Symbol.PipSize, 1);
lpb = "\nSell Target Away = " + osl;
}
if (sp_d > MaxSpread)
gc_78 = "MAX SPREAD EXCEED";
else
gc_78 = "Top Grid" + nb_6 + wn_7 + sp_4 + wn_8 + ppb + lpb;
return (gc_78);
}
private int cnt_16()
{
int ASide = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
ASide++;
}
return ASide;
}
private int o_tm(TradeType TrdTp)
{
int TSide = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
TSide++;
}
}
return TSide;
}
private double pnt_12(TradeType TrdTp)
{
double Result = 0;
double AveragePrice = 0;
long Count = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
{
AveragePrice += position.EntryPrice * position.Volume;
Count += position.Volume;
}
}
}
if (AveragePrice > 0 && Count > 0)
Result = Math.Round(AveragePrice / Count, Symbol.Digits);
return Result;
}
private double D_TD(TradeType TrdTp)
{
double D_TD = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
{
if (D_TD == 0)
{
D_TD = position.EntryPrice;
continue;
}
if (position.EntryPrice < D_TD)
D_TD = position.EntryPrice;
}
}
}
return D_TD;
}
private double U_TD(TradeType TrdTp)
{
double U_TD = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
{
if (U_TD == 0)
{
U_TD = position.EntryPrice;
continue;
}
if (position.EntryPrice > U_TD)
U_TD = position.EntryPrice;
}
}
}
return U_TD;
}
private double f_tk(TradeType TrdTp)
{
double prc_4 = 0;
int tk_4 = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
{
if (tk_4 == 0 || tk_4 > position.Id)
{
prc_4 = position.EntryPrice;
tk_4 = position.Id;
}
}
}
}
return prc_4;
}
private long lt_8(TradeType TrdTp)
{
long lot_4 = 0;
int tk_4 = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
{
if (tk_4 == 0 || tk_4 > position.Id)
{
lot_4 = position.Volume;
tk_4 = position.Id;
}
}
}
}
return lot_4;
}
private long clt(TradeType TrdTp)
{
long Result = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == TrdTp)
Result += position.Volume;
}
}
return Result;
}
private int Grd_Ex(TradeType ai_0, TradeType ci_0)
{
double prc_4 = f_tk(ci_0);
int tk_4 = 0;
for (int i = Positions.Count - 1; i >= 0; i--)
{
position = Positions[i];
if (position.Label == Label && position.SymbolCode == Symbol.Code)
{
if (position.TradeType == ai_0 && ai_0 == TradeType.Buy)
{
if (Math.Round(position.EntryPrice, Symbol.Digits) <= Math.Round(prc_4, Symbol.Digits))
tk_4++;
}
if (position.TradeType == ai_0 && ai_0 == TradeType.Sell)
{
if (Math.Round(position.EntryPrice, Symbol.Digits) >= Math.Round(prc_4, Symbol.Digits))
tk_4++;
}
}
}
return (tk_4);
}
private long n_lt(TradeType ca_8)
{
int ic_g = Grd_Ex(ca_8, ca_8);
long gi_c = lt_8(ca_8);
long ld_4 = Symbol.NormalizeVolume(gi_c * Math.Pow(VolumeExponent, ic_g));
return (ld_4);
}
private long fer(long ic_9, int bk_4)
{
long ga_i = Symbol.VolumeMin;
long gd_i = Symbol.VolumeStep;
long dc_i = Symbol.VolumeMax;
long ic_8 = ic_9;
if (ic_8 < ga_i)
ic_8 = ga_i;
if (ic_8 > dc_i)
ic_8 = dc_i;
return (ic_8);
}
}
}
mattia.musiello
Joined on 23.07.2020
- Distribution: Free
- Language: C#
- Trading platform: cTrader Automate
- File name: Top Grid.algo
- Rating: 5
- Installs: 4059
- Modified: 13/10/2021 09:54
Comments
Man, this is very amazing code, try it in 2020 to test if it can hold during Covid-19 !
is it possible to reduce the spread between Buy and sell from 8.2 pip into 1 pip only ?
try it with 0.5 lot and pip step 50, take profit 50.
it will hold even in the fu*cking 2020 !
Good work man !
hello, how can i change the lots? it always use 0.01 lot !
Ciao Mario,
per il Nasdaq non ho esperienza, ho studiato molto il Forex e nello specifico solo 3 monete ma provo a fare qualche prova.
Per i contratti io credo che sia dovuto al tuo Broker, presumo che sia buona idea chiedere al Broker di fiducia questi dettagli, ma non so risponderti in modo piu' dettagliato.
Buona giornata.
Ciao Mattia,
Stavo testando il bot sul Nasdaq, la minimum quantity sono 10 contratti e non e' possibile settare la minimum quantity a 1 contratto.
Si potrebbe risolvere questa cosa?
Complimenti per il cBot!
Aggiornamenti in corso
Buoni risultati tp5 ps30 exp1.8
Massimo controllo dd equity
ciao,come viene calcolato lo spostamento tp ad ogni incremento???
Before opening positions maybe you have to try and study how it works, this is a robot, not a social worker. It's math.
The system works well, to understand if it is ok I keep it in test for at least 1 week for the configuration and then it must always be checked.
The market changes often and you are the driver of the ship.
You have to do the backtesting, the optimization is a process that requires a lot of work and you must have knowledge of what you do.
[ITA] Il Robot gestisce tutte le posizioni aperte sempre, e' un robot, ma tu devi controllare spesso se tutto funziona correttamente, e' un robot che esegue i tuoi ordini in modo preciso.
Le condizioni di mercato cambiano spesso e tu devi essere pronto a cambiare o mettere in stop lo strumento di lavoro o ricalcolare alcuni parametri strada facendo.
Questo semplice algoritmo funziona bene e regolare, buona fortuna.
se venerdi chiudo il terminale,lasciando posizioni aperte...e riaccendo il pc domenica sera,il bot gestirà le posizioni rimaste aperte?
SE PROVO A FARE OTTIMIZAZIONE NON DA RISULTATI
EURUSD 1MIN
STO PROVANDO TP 5 PIPSTEP 20 LOTTO 0.01 EXP 1.4
Now i have this in demo from 1 week this and work very well.
I check.
Which instrument? Forex? Commodity?
This config is only for EURUSD, try other lots quantity.
ciao mattia lottimizzazione non parte
dont work ottimization
Con quale leva va usato questo cBot? Può essere usata qualunque leva?